• 測量原理不受流體物理特性的影響(例如：粘度和密度)。

• 專用于衛生型場合滿足*佳清洗效果的流量計。

儀表特點

• 多種衛生型過程連接

• 3A認證和EHEDG認證

• CIP/SIP清洗后能夠快速恢復

• 堅固耐用的超緊湊型一體式變送器外殼

• 高防護等級：IP69K

• 提供現場顯示單元

特征和規格

測量原理	科氏力質量流量計
產品標題	The easy‐ o‐clean flowmeter with self‐drainable single‐ ube system and an ultra‐compact transmitter. Dedicated for applications requiring optimal cleanability under hygienic conditions.
傳感器特點	Increased process safety – easy cleanable and fully self‐drainable tube design. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in/outlet run needs. Large range of hygienic process connections. 3‐A and EHEDG conform.
變送器特點	Space‐saving transmitter – full functionality on the smallest footprint. Time‐saving local operation without additional software and hardware – integrated web server. Integrated verification – Heartbeat Technology. Robust, ultra‐compact transmitter housing. High Ingress protection: IP69.
公稱口徑范圍	DN 8 to 50 ( to 2")
接液部件材質	Measuring tube: 1.4435 (316L) Connection: 1.4435 (316L); 1.4404 (316/316L)
測量變量	Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
*大測量誤差	Mass flow (liquid): ±0.10 %  Volume flow (liquid): ±0.10 %  Mass flow (gas): ±0.50 %  Density (liquid): ±0.0005 g/cm³
測量范圍	0 to 70 000 kg/h (0 to 2570 lb/min)
*大過程壓力	PN 40, Class 150, 20K
介質溫度范圍	–50 to +150 °C (–58 to +302 °F)
環境溫度范圍	Standard: –40 to +60 °C (–40 to +140 °F)  Option: –50 to +60 °C (–58 to +140 °F)
傳感器外殼材質	1.4301 (304), corrosion resistant
變送器外殼材質	Compact: AlSi10Mg, coated  Compact/ultra‐compact: 1.4301 (304)
防護等級	Standard: IP66/67, type 4X enclosure  Option: IP69
顯示/操作	4‐line backlit display available (no local operation)  Configuration via web browser and operating tools possible
輸出	4‐20 mA HART (active)  Pulse/frequency/switch output (passive)
輸入	None
數字式通信	HART, Modbus RS485, EtherNet/IP, PROFIBUS DP, PROFINET
電源	DC 20 to 30 V
危險區認證	ATEX, IECEx, cCSAus, INMETRO, NEPSI, EAC
產品安全性	CE, C-Tick, EAC marking
計量認證和證書	Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR  Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)
壓力認證和證書	PED, CRN
船級證書	3.1 material
衛生型認證和證書	3‐A, EHEDG