• 測量原理不受流體物理特性的影響(例如：粘度和密度)。

• 在變化的苛刻工況條件下進行液體和氣體測量，具有*高測量性能。

儀表特點

• 質量流量測量誤差：±0.05 % (PremiumCal)

• 介質溫度：-196...350 °C (-320...662 °F)

• 標稱口徑：DN 8...250 (3/8...10")

• 分體式儀表，*多帶4路輸入/輸出

• 背光顯示、觸摸鍵控制和WLAN訪問

• 傳感器和變送器通過標準電纜連接

特征和規格

測量原理	科氏力質量流量計
產品標題	The flowmeter with premium accuracy and robustness, as remote version with up to 4 I/Os. Highest measurement performance for liquids and gases under varying, demanding process conditions.
傳感器特點	Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Mass flow: measured error ±0.05 % (PremiumCal). Medium temperature: -196 to 350 °C (-320 to 662 °F).
變送器特點	Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access.
公稱口徑范圍	DN 8 to 250 ( to 10")
接液部件材質	Measuring tube: 1.4539 (904L); 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022) Connection: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022); 1.4301 (F304)
測量變量	Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
*大測量誤差	Mass flow (liquid): ±0.10 % (standard), 0.05 % (option) Volume flow (liquid): ±0.10 % Mass flow (gas): ±0.35 % Density (liquid): ±0.0005 g/cm³
測量范圍	0 to 2 200 000 kg/h (0 to 80 840 lb/min)
*大過程壓力	PN 100, Class 600, 63K
介質溫度范圍	Standard: –50 to +150 °C (–58…+302 °F) Option: –50 to +240 °C (–58…+464 °F) High temperatur option: –50 to +350 °C (–58…+662 °F) Option: –196 to +150 °C (–320 to +302 °F)
環境溫度范圍	Standard: –40 to +60 °C (–40 to +140 °F) Option: –60 to +60 °C (–76 to +140 °F)
傳感器外殼材質	Standard: 1.4301 (304), corrosion resistant Option: 1.4404 (316L) Sensor connection housing (standard): AlSi10Mg, coated Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L
變送器外殼材質	AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat
防護等級	Sensor remote version (standard): IP66/67, type 4X enclosure Sensor remote version (option): IP69.  Transmitter remote version: IP66/67, Type 4X enclosure External WLAN antenna: IP67
顯示/操作	4-line backlit display with touch control (operation from outside) Configuration via local display and operating tools possible
輸出	4 outputs:  4-20 mA HART (active/passive)  4-20 mA WirelessHART  4-20 mA (active/passive)  Pulse/frequency/switch output (active/passive)  Double pulse output (active/passive)  Relay output
輸入	Status input 4-20 mA input
數字式通信	HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
電源	DC 24 V AC 100 to 230 V  AC 100 to 230 V / DC 24 V (non-hazardous area)
危險區認證	ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC
產品安全性	CE, C-tick, EAC marking
功能安全性	Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
計量認證和證書	Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)  MI-005 (Liquids other than water, Hydrocarbons, cryogenic liquids)  NTEP (Liquids other than water, LPG, cryogenic liquids)  MC (Liquids other than water, cryogenic liquids)
壓力認證和證書	PED, CRN, AD 2000
船級證書	3.1 material NACE MR0175/MR0103, PMI; welding test acc. to EN ISO, ASME, NORSOK
衛生型認證和證書	3-A, EHEDG